Wholesale clothing size charts can look comparable while describing different things. One supplier may give body measurements, another may give finished garment dimensions, and a third may show a general size conversion. Before buying a run of sizes for your boutique, establish what each chart actually describes.
The useful decision is whether the available evidence supports the exact sizes you intend to order. This guide explains how to compare chart entries and identify the missing information between them. It is not a universal UK size chart, a pattern-grading rule or a guarantee of fit.
Identify what the wholesale clothing size chart measures
Read the chart heading, notes and product-specific explanation before comparing numbers. A body-measurement chart describes the intended wearer measurements within its stated scope. A garment-measurement chart describes the item. A conversion chart maps labels; it does not necessarily supply either set of dimensions. If the type is not stated, ask rather than choosing the interpretation that makes the purchase look suitable.
Retain the exact size labels, including combined options such as S/M. Do not silently translate them into individual sizes or a wider UK range. Check whether the chart applies to this style, this supplier range or a different garment altogether, and record the source and date. A generic chart beside a product is not evidence that every listed dimension was measured on that product.

Make each dimension genuinely comparable
Start with the same style, colour, component and measurement point. Keep units explicit. A flat chest width is not a body bust circumference; a front length is not a back length. Even two entries called sleeve length may use different starting points. Record whether the garment is relaxed, whether fastenings are closed and which endpoints the supplier uses.
Use the garment measurement recording guide when checking a physical piece. The comparison here begins after the method is clear; it does not replace that measuring routine. Keep supplier-stated values separate from observations of your own identified samples.
Do not subtract a body measurement from an unrelated flat garment width to calculate fit allowance. Nor should doubling a flat width become a guaranteed wearer size. Shape, construction and intended fit still need their own evidence. When comparing different suppliers, the same letter on the label is only a label match until the relevant information is established.
Compare the size run, not just the middle option
Read each size you plan to buy across the dimensions that matter to your brief. A wider chest entry does not tell you whether the sleeve, hem opening or length also changes. For a set, compare the top and bottom separately. One component cannot stand in for the other.
It can be useful to calculate the difference between adjacent entries in a confirmed garment chart. Describe this as the difference between those stated values, not a universal grading increment. Do not fill an empty cell by repeating the previous increase. A missing dimension remains missing, even when the surrounding figures form a neat pattern.
Likewise, an unchanged value is not automatically a mistake. Preserve it and ask if it matters to the buying requirement. An unusual sequence may reflect the design, a different method or an error; the chart alone does not decide which. Do not invent a tolerance to dismiss a discrepancy.
A chart comparison that changes the buying decision
Hypothetical example, not Catwalk product data: a supplier confirms that the following figures are relaxed flat garment measurements in centimetres, taken with the same endpoints for one top in one colour. The boutique is comparing S, M and L for an untucked-length brief.
- Chest width: S is 48 cm, M is 51 cm and L is 54 cm. The stated difference is 3 cm from S to M and 3 cm from M to L. These are flat-width differences, not a body-size conversion.
- Back length: S is 62 cm, M is 63 cm and L is 63 cm. The stated changes are 1 cm, then 0 cm. Ordering L provides no additional stated back length over M.
- Upper-sleeve width: only the M value is supplied. The chest-width sequence does not establish the missing S and L sleeve values.
If the buyer requires more back length than the confirmed M measurement, this chart does not support choosing L as the solution. If sleeve room also matters, that requirement remains unresolved for S and L. The next step is a precise request for the missing dimensions or a different candidate, not an extrapolated chart.
This comparison does not prove any size will or will not fit a particular customer. It shows which purchase assumptions the supplied figures support. If the supplier later corrects a value, retain the earlier version and the explanation rather than silently changing the buying record.
Keep unknown, conflicting and observed information separate
Missing: the relevant size or dimension has no stated value. Ask for that exact cell and its method. Do not copy it from another colour, a similar design or a neighbouring size.
Conflicting: two sources give different values for the same identified option. First compare units, endpoints, chart version and garment state. Preserve both sources and ask which applies to the stock being considered. A later message needs a clear scope, not merely a more reassuring number.
Observed: an identified sample has been checked using a recorded method. That observation applies to the piece assessed; it does not establish every unit or replace all supplier values. If physical comparison is necessary, use the sample buying guide to agree the arrangement and permitted handling first.
For later deliveries, the restock information guide covers comparing old and new evidence without losing the original record. Do not announce a changed specification merely because two differently measured samples produced different numbers.
Decide suitability before expanding the pack
A size chart describes information about options; a pack ratio describes the quantities purchased. Keep the two decisions separate. First establish which labelled options have a supported role in the range and which remain uncertain. Then use the wholesale size-ratio comparison to see what the complete purchase adds.
If one option remains unresolved but is part of an indivisible offered pack, that uncertainty affects the whole purchase decision. Do not assume the supplier will remove it or that you can return it later. Catwalk trade terms allow individual pieces or the pack or size ratio shown on the product page; check the actual selected option rather than assuming every size can be ordered separately.
Give the selling team the chart source, exact labels, measurement type, relevant methods and any scoped sample observations. Keep body guidance and garment dimensions visibly distinct in customer information. The goal is not to make every chart look complete: it is to buy with a clear account of what is known, what remains unanswered and which size-related promises the evidence actually supports.